Filter
Top Products
Operating _23
02 OPERATING
Ice off
This icon will light up when you press the “Ice Off” button. In this case, the ice will not be produced.
Energy saver
This icon will light up when you press the Energy Saver button. The Energy Saver function is automatically
set to “ON” when power is supplied to the refrigerator. If condensation occurs on the doors, turn the
Energy Saver mode off.
Lighting
This icon will light up when you press the Lighting button. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the
dispenser, turn the Lighting mode off.
Alarm
This icon will light up when you press the Alarm button. The door alarm will sound if any door is open for
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Lock
This icon will light up when you press the Lock button. In this case, you won’t be able to use the control
panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use
the control panel again.
CONTROLLING THE TEMPERATURE
Basic temperature of Freezer and Refrigerator Compartments
The basic temperature and/or recommended temperatures of the freezer and refrigerator Compartments
are -2°F and 38°F respectively. If the temperature of freezer and fridge Compartments are too high or low,
adjust the temperature manually.
Controlling the Freezer temperature
The freezer temperature can be set between 8°F and -8°F to
suit your particular needs. Press the freezer button repeatedly
until the desired temperature is shown in the temperature display.
The temperature will move 2°F degrees each push (-2°F → -4°F
→ -6°F → -8°F → 8°F → 6°F → 4°F → 2°F → 0°F → -2°F). Keep
in mind that foods like some ice cream may melt at 4°F. The
temperature display will move sequentially from -8°F to 8°F.
Using the Power Freeze
If you need a lot of ice or if you want to cool down the freezer
faster, you can use the Power Freeze function. Press and hold
the Freezer / Power Freeze (3 sec) button for 3 seconds. Then,
the power freeze indicator will light and activate the power freeze
mode independent of the freezer set temperature. If you select
Power freeze, the inside temperature of the freezer will decrease
for about two and a half hours. When you have enough ice, just
press and hold the button for 3 seconds again to cancel the
Power Freeze mode. Then, the indicator will go out and the
freezer will return to the set temperature again.
DA68-01827B-17.indb 23DA68-01827B-17.indb 23 2014. 5. 8. 4:392014. 5. 8. 4:39