Filter
Top Products
28_ Operating
Energy saver
This icon will light up when you press the Energy Saver button. The Energy Saver function is automatically
set to “ON” when power is supplied to the refrigerator. If condensation occurs on the doors, turn the
Energy Saver mode off.
Lighting
This icon will light up when you press the Lighting button. In this case, the dispenser light(under the
display) will be on constantly. If you would like the dispenser light to come on only when using the
dispenser, turn the Lighting mode off.
Alarm
This icon will light up when you press the Alarm button. The door alarm will sound if any door is open for
more than 3 minutes. The beeping stops when you close the door. Initially the Alarm is set to on.
Lock
This icon will light up when you press the Lock button. In this case, you won’t be able to use the control
panel. If you press and hold the Ice Off/Hold button for 3 sec to unlock Child Lock, you will be able to use
the control panel again.
Fridge Ice off
This icon will light up when you press the Fridge Ice Off button. In this case, the fridge ice will not be produced.
Freezer Ice off
This icon will light up when you press the Freezer Ice Off button. In this case, the freezer ice will not be produced.
• As this refrigerator has a dual Ice Maker, there is a possibility of using more energy. We recommend if you have
enough ice, set Ice Off to save energy.
• You may occasionally hear noises from Ice dropping or water fl owing to the icemaker. These noises are part of
normal operation.
CONTROLLING THE TEMPERATURE
Basic temperature of Freezer and Refrigerator Compartments
The basic temperature and/or recommended temperatures of the freezer and fridge Compartments are
-2°F and 38°F respectively. If the temperature of freezer and fridge Compartments are too high or low,
adjust the temperature manually.
Controlling the Freezer temperature
The freezer temperature can be set between 8°F and -8°F to suit
your particular needs. Press the freezer button repeatedly until
the desired temperature is shown in the temperature display. The
temperature will move 2°F degrees each push (-2°F → -4°F → -6°F
→ -8°F → 8°F → 6°F → 4°F → 2°F → 0°F → -2°F). Keep in mind
that foods like some ice cream may melt over 4°F. The temperature
display will move sequentially from -8°F to 8°F. Five seconds after
the new temperature is set, the display will show the actual current
freezer temperature until the new temperature is reached.
Using the Power Freeze
If you need a lot of ice or if you want to cool down the freezer
faster, you can use the Power Freeze function. Press and hold the
Freezer / Power Freeze (3 sec) button for 3 seconds. Then, the
power freeze indicator will light and activate the power freeze mode
independent of the freezer set temperature. If you select Power
freeze, the inside temperature of the freezer will decrease for about
two and a half hours. When you have enough ice, just press and
hold the button for 3 seconds again to cancel the Power Freeze
mode. Then, the indicator will go out and the freezer will return to the
set temperature again.
DA68-01827B-17.indb 28DA68-01827B-17.indb 28 2014. 5. 8. 4:392014. 5. 8. 4:39