Filter
Top Products
40
HOW TO USE VIRTUAL KEYBOARD
How to control touch point.
This setting helps to calibrate the I.C.E. PAD for use with the Stylus Pen.
- Hold the stylus pen and press down lightly on the center of the "+" mark.
- Repeat as the '+" mark moves on the screen. (refer to screen)
- After finishing touch point setting, touch a screen within 30 seconds in order to apply setting.
The Touch point setting will be run when you press the reset
button, or you can select the "Touchpoint" calibration in the
Settings function(refer to 51-How to calibrate touch point)
NOTE
In order to continue special characters mode, choose " " key.
NOTE
2. Handwriting mode
3. Example of contin-
uous handwriting
recognition mode
Activates the basic Keyboard
Recognizes numbers
writing recognition mode
Activates the Spanish
keyboard
Recognizes English
Characters
Recognizes special Characters
Screen keyboard with " " key pressed Screen keyboard with " " key pressed
This enables you to handwrite text using the stylus pen.
Choose the " " or " " key.
-
It will then change to continuous handwriting recognition mode or handwriting recognition mode.
Starting point :
English Characters
Starting point : Numbers
Starting point :
Special Characters
In continuous handwritten mode, each starting
point is apart from one another. Once you start
writing, you can keep writing in character you
choose unless you choose other sections.
NOTE