Filter
Top Products
operating
_73
02 OPERATING
4. You can set the Override time from 1 hour to 24 hours.
After the set time, the Override function turns off and
Smart Grid control starts. If you select "Permanently", the
Override function operates continuously until you turn the
Override function off or set a time.
5. Press the [Save] button.
• If "Permanently" does not turn off, the Override function
will operate continuously.
• If you think refrigerator temperature is too high, you
need to use "Override" function.
• If you think there is not enough ice, you need to use
"Override" function.
How to select the Limit Delay Time on Smart Grid
1. Press the button in the bottom right corner of the Settings list.
2. Select [Smart Grid] in the Settings list.
3. Select "Limit Delay Time" from 1 hour to 4 hours. "Limit
Delay Time" lets you set the maximum time during which
Smart Grid control operates.
4. Press the [Save] button.
• If you don't choose the a "Limit Delay Time" Option,
Smart Grid works with the "4-hour" option by default.
DA68-02500B.indb 73 2012.6.7 1:41:11 PM