Filter
Top Products
20
· English
< > : Takes a picture of current live image you are viewing.
< > : When enabled, you can hear what’s happening around the camera.
Depending on the policy of the Internet service provider, the sound output may not be
supported. (in either 3G UDP or Relay mode)
< > : Enable and disable night vision.
IR Flash will run for 2 minutes after accessing the live screen.
Even if you click the IR Flash icon while it is working, it will still run
for just two minutes.
Even if the surrounding brightness increases enough to switch to
the color mode while in IR-Flash mode, the IR-Flash icon will be
active after 2 minutes.
If there exists an object near the camera, IR Flash can be activated.
•
•
n
`
•
•
•
•
•
Camera has ability to send event notifications when motion or audio is detected.
See the notification bar below the live view.
From the bottom menu bar of the live screen, select to click one of SNS,
Messenger, and Email. The context menu should appear.
Provide the user ID and password that you have created and set in the previous site.
If you fail to synchronize time, no event alarm will occur.
In order to synchronize time, the device should be connected to the Internet.
1.
n
`
`
`
Depending on your internet provider, When the camera can’t connect your phone or
PC directly, Relay mode show on display screen and the live video viewing may
time-out after 1 minute.
The Night Vision video produces a different visibility according to the distance
between camera and subject. (See the picture below)
1m distant (1.0 field) 2m distant (0.65 field) 3m distant (0.5 field)
n
`
`