Filter
Top Products
01
Used to connect to the Wireless
Access Point
Press once to stop transmitting
video/audio
Press and hold for 5sec to reset
the camera to default settings
Plug-in the camera power adapter to the wall outlet and connect the camera as
shown.
Make sure to use the provided power adaptor. Otherwise, the product may not
operate properly.
It will take about 1min for the camera to boot-up completely.
When the boot-up is complete, the power LED color will change from red to
white.
n
`
`
`
Used if WPS is not supported on
the Wireless Access Point or if
you do not have a Wireless
Access Point