10
●
Second : Adjust the height of the refrigerator door.
●
If the door of freezer is situated lower
than the door of refrigerator..
●
If the door of freezer is situated higher
than the door of refrigerator..
3) When you are finished with it, please make a nut's (①) turn until the last point in
the direction of an arrow ( ) then fix it again with wrench (➂).
Attention : If you didn't fix a nut (
①
)firmly, a blot (
➁
) could be released.
➂ WRENCH
Adjustment part
➀ NUT
➁ BOLT
Adjustment part
➂ WRENCH
➀ NUT
➁ BOLT
➀ NUT
➁ BOLT
➂ WRENCH
➂ WRENCH
➂ WRENCH
➁ BOLT
➁ BOLT
●
please open the door of refrigerator and adjust the height following the direction below.
1) Release a nut (①) in the bottom part of refrigerator until the last point of bolt (➁).
❇
When you release the nut(①), please fix the extra wrench(➂) which is wrapped to a bolt(➁)then
release a nut(①) after making a turn little bit in the direction of an arrow ( ).
➁ BOLT
➂ WRENCH
➀ NUT
2) Please adjust the height difference between the door of refrigerator and that of freezer making a
bolt's (➂) turn with the wrapped extra wrench(➁) in the direction of an arrow
().
❇
When you make a turn a bolt (➁) in the direction of an arrow ( ), the door of refrigerator goes up.
DA68-00500P 6/26/02 2:35 PM Page 26