Filter
Top Products
WATER TUBE
PURIFIER
PURIFIER
LOCK STA-
TIONS
PURIFIER LOCK STA-
TION
PURIFIER LOCK STA-
TION
4. Attach the purifier lock stations.
(Model with the purifier)
1) Hold the purifier lock stations in the appro-
priate position (under the sink for example)
and fix it tightly into place where to screw.
5. Secure the purifier in position.
(Model with the purifier)
1) Fix the purifier in position, as shown in the
figure on the right.
TIGHTENING
BAND
BACK COVER OF
FRIDGE/FREEZER
6. Connect the water tube to the fridge.
1) Remove the back cover of the fridge.
2) Connect the water tube to the valve, as
shown in the figure.
(The connection nut is located on the right
side of the maintenance panel on the back
of the fridge.)
3) When connected, check whether there is any
leakage.
If any, repeat the connection.
4) Assembly the back cover of the fridge.
CONNECTION NUT
WATER TUBE
CLIP A
WATER TUBE
7. Secure the water tube.
1) Using clip ”A”, fix the water tube to the wall.
2) When the water tube is secure, make sure
whether the water tube is not excessively
bent, pinched or squashed.
13
DA68-00500P 6/26/02 2:35 PM Page 29