Sanyo EMS-8600S Microwave Oven User Manual


  Open as PDF
of 22
 
INSTALLATION
Remove all packing material and accessories. Examine the oven for any damage such
as dents or broken door. Do not install if oven is damaged. Do not remove the light brown
Mica cover that is attached inside the oven cavity to protect the magnetron.
NOTE: This unit is not designed for 50 Hz or any circuit other than a 120-volt/ 60-Hz AC
circuit. This oven is designed for counter top installation.
Counter top Installation
1. Select a level surface that
provides enough open space for
the in take and/or outlet vents.
3"
3"
3"
A minimum clearance of 3 inches
is required between the oven and
any adjacent wall. One side must
be open.
OPEN
• Leaveaminimumclearanceof3inches
above the oven.
• Donotremovethelegsfromthebottom
of the oven.
• Blockingtheintakeand/oroutlet 
openings can damage the oven.
• Placetheovenasfarawayfromradios
and TV’s as possible. Operation of
microwave oven may cause interference
to your radio or TV.
• Ifthecabinetiscoveredwithaprotective
lm,removethelm.
2. Plug your oven into a standard
120-volt / 60-Hz household outlet.
Be sure the electrical circuit is at least 15
amperes and that your microwave oven
is the only appliance on the circuit.
WARNING: Do not install oven over a range
cook top or other heat-producing appliance.
If installed near or over a heat source, the
oven could be damaged and the warranty
would be void.
-9-
 previous next