Sears 10062603 Refrigerator User Manual


 
lect:ron c Con±rol s
THERMOSTATIC REFRIGERATOR CONTROL
An electronic thermostatic sensor mea-
sures refrigerator air temperatures con-
stantly and automatically lets in more
cold a}r if temperatures rise as tittle as
1112° F from your setting
PROGRAMMING YOUR REFRIGERATOR
TEMPERATURE SETTINGS
With the Electronic Control, you can
precisely control the temperature in the
refrigerator and freezer sections without
even opening the doors..The freezer
temperature and the refrigerator tem-
"erature may be changed independent
one another, The temperature of
each can be set at one of nine tempera-
ture levels. One (1)being the warmest
and nine (9)the coldest.. When chang-
ing the temperature, the temperature
indicator Dightswill be on. The indicator
lights will tell you whether the freezer or
refrigerator temperature is being
changed and what level the tempera-
ture is currently at.
To Set Or Change The Temperature in The Refrigerator
The Control has nine settings, from '1'
(the warmest) to '9' (the coldest), The
best food storage temperature is in the
38° to 40°F range. Start by program-
ming your controls as foIiows:
1. Press the START pad (ELECTRONIC
TEMPERATURE CONTROL).
2. Press the REF TEMP pad. This tells
the control panel you want to set the
temperature in the refrigerator.
3_
4.
The starting temperature setting in
the refrigerator is level 5.
Press the WARMER pad or COLDER
pad to raise or lower the temperature
setting one level at a time° Continue
to hell the WARMER pad or
COLDER pad down to raise or Iower
the temperature more than one level
at a time
+
+
or
Raises Or Lowers
= Temperature Setting
One Level At A Time
or
+
or
t_let_ooi_Qt w_
C0nlinoe to Ptes_ Down
Lowers Temperature
= Setting More Than
One Level At A Time
+ +
Raises Temperature
= Setting More Than
co_i_ _oP_ oow_ One Level At A Time
Load food in the refrigerator, Place a
thermometer in a glass of water in
the middle of the refrigerator section,
making sure that air can flow around
it. (This will be used later to check
food temperatures) Alter the unit is
installed, allow 24 hours for the refrig-
erator to cool Check food tempera-
ture as instructed on page 18 Adjust
the control as needed, one level at
a time.
t3