Filter
Top Products
1
PART NAME
EXHAUST DUCT BACK
PDVC-B107WRWZ
EXHAUST DUCT UPPER
PDVC-B105WRWZ
DIVIDE PLATE L
PSKR-A486WRWZ
DIVIDE PLATE R
PSKR-A487WRWZ
RECTIFIER PLATE L
PSKR-A484WRWZ
EXHAUST DUCT LEFT
PDVC-B108WRWZ
EXHAUST DUCT RIGHT
PDUC-B117WRWZ
EXHAUST DUCT BOTTOM
PDVC-B106WRWZ
FRAME ASSEMBLY
FDEC-A004WRKZ
SCREW(A)
XHTS740P08000
SCREW(B)
XMMS841P13000
SCREW(C)
XMSS827P25000
REAR SPACER
PSPAFA003WRWZ
CUSHION
1
5
/8" x 16",
15 mm x 405 mm
PCUS-A245WRPZ
CUSHION
2
1
/4" x 24
3
/8",
5 mm x 618 mm
PCUS-A247WRPZ
CUSHION
3
1
1
/8
" x 27
1
/8
",
30 mm x 689 mm
PCUS-A249WRPZ
CUSHION
4
1
/4" x 12",
5 mm x 305 mm
PCUS-A251WRPZ
CUSHION
5
1
/4" x 15",
5 mm x 382 mm
PCUS-A253WRPZ
INSTALLATION INSTRUCTIONS
BUILT-IN KIT MODEL
IMPORTANT: This Built-In Kit is designed for use with Sharp SuperSteam Ovens specifying a RK-12S30
Built-In Kit on the rating label on the front of the oven.
The cabinet or wall opening must be within the following dimensions:
HEIGHT 19" to 19
1
/8" (482 mm - 486 mm)
WIDTH 28" to 28
1
/4" (710 mm - 719 mm)
DEPTH 23
1
/4" minimum (509.5 mm minimum)
The completed built-in kit frame assembly dimensions:
HEIGHT 19
1
/2" (495mm)
WIDTH 30" (762mm)
NOTE: The bottom of the cut-out opening for built-in use must be 36 inches (915 mm) or higher from the floor.
PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE BEGINNING INSTALLATION!
The electrical requirements for this oven are 120 volts, 15 amps. The oven has a 5-15 plug
and requires a 5-15 receptacle.
RK-12S30
Q'TY
1
1
1
1
1
1
1
1
1
23
2
4
1
2
1
1
1
1
* For walls other than wood, you may need screws appropriate for that
wall to install the frame.
*
Be sure to DISCONNECT THE PLUG of the oven from the electrical
outlet before installing the oven and kit.
* Because the kits are metal, due caution should be used in handling
and installation to avoid the possibility of injury.
PROVIDED PARTS
SCREW (C) - LONG
EXHAUST DUCT BOTTOM
EXHAUST DUCT
BACK
EXHAUST
DUCT UPPER
EXHAUST
DUCT
RIGHT
DIVIDE PLATE L
DIVIDE PLATE R
FRAME
ASSEMBLY
RECTIFIER
PLATE L
EXHAUST
DUCT LEFT
REAR SPACER
SCREW (B) - MIDDLESCREW (A) - SHORT
TINSEB184WRRZ-D92
Printed in Thailand
RK12S30 2nd 09.1.14, 11:01 AM1