Filter
Top Products
7
STEP 8: OVEN INSTALLATION
CAUTION: Never hold the handle when moving the oven. Two persons are required to install the oven.
1Establish center line of opening and mark front edge.
2Place the oven on a table or stand positioned in front of the cabinet where the oven is to be installed.
One person should hold the oven while the other connects it to the electrical outlet.
3Install the oven into the shelf with adjusting mark on EXHAUST DUCT BOTTOM to the center line
marked on front edge as shown in Figures 8 and 8-A. Then push the oven until the flange of EXHAUST
DUCT BOTTOM touches the edge of the wall or cabinet opening. Avoid pinching the cord between the
oven and any wall as shown in Figure 8.
CL
28" - 28
1
/
4
" (710
mm
- 719 m
m)
STEP 7: INSTALLATION OF EXHAUST DUCT RIGHT
1 Attach EXHAUST DUCT RIGHT to the right wall of the oven.
2 Tighten with 4 SCREWS (A) as shown in the Figure 7.
Figure 7
Figure 8
SCREW (A)
SCREW (A)
EXHAUST DUCT
RIGHT
Figure 8-A
EXHAUST DUCT UPPER
DIVIDE PLATE R
Flange
RK12S30 2nd 09.1.7, 5:19 PM7