Filter
Top Products
2
PREPARATION
Follow the directions from 1 to 5 to attach cushions to some parts.
1. EXHAUST DUCT UPPER
Remove the backing paper from each CUSHION 1.
Attach the CUSHIONS 1 to each side flange of the EXHAUST DUCT UPPER as shown in the illustration
below.
2. EXHAUST DUCT BACK
Remove the backing paper from CUSHION 2.
Attach the CUSHION 2 at the lower flange of the EXHAUST DUCT BACK as shown in the Illustration below.
CUSHION 1 CUSHION 1
EXHAUST DUCT UPPER
CUSHION 2
EXHAUST DUCT BACK
RK12S30 2nd 09.1.7, 5:19 PM2