Filter
Top Products
General instructions
EN
6
2. SAFETY PRECAUTIONS
Refer to the installation instructions for the safety regulations for electric or gas
appliances and ventilation functions.
In your interests and for your safety the law requires that the installation and
servicing of all electrical appliances is carried out by qualified personnel in
accordance with the regulations in force.
Our approved installers guarantee a satisfactory job.
Gas or electrical appliances must always be disconnected by suitably skilled
people.
Before connecting the appliance to the power grid, check the data on the plate
against the data for the grid itself.
Before carrying out installation/maintenance work, make sure that the appliance
is not connected to the power grid.
The plug to be connected to the power supply cable and its socket must be of
the same type and conform to the regulations in force.
The socket must be accessible after the appliance has been built in.
Never disconnect the plug by pulling on the cable.
If the power supply cable is damaged, contact the technical support service
immediately and they will replace it.
It is obligatory for all electrical equipment to be earthed according to the
methods laid down by safety regulations.
Immediately after installation, carry out a brief inspection test, following the
instructions below. Should the appliance not function, disconnect it from the
electricity supply and call the nearest technical support centre.
Never attempt to repair the appliance.
Do not use or leave flammable materials near the appliance or in the food
warming compartment.
During use the appliance becomes very hot. take care not to touch the heating
elements inside the oven.
This appliance must not be used by people (including children) of reduced
physical and mental capacity, or lacking in experience in the use of electrical
appliances, unless they are supervised or instructed by adults who are
responsible for their safety.