Filter
Top Products
Instructions for the installer
7
Carefully position the insulation gasket (supplied) on the external perimeter of the
hole made in the top surface (see figures below) and try to make it stick to the entire
surface by applying light pressure with your hands. Refer to the distances shown in
the figure for the model to be installed, keeping in mind that for both models the long
front side has to skim the hole. Secure the hob to the counter with brackets A
(supplied). Carefully trim any excess from border B of the gasket. The distances in
the following drawing refer to the hole on the inner side of the gasket.
The diagram below shows the exact positions of the holes to be used for clamping
the hob to the top correctly.
Overall dimensions: location of gas and electrical connection points (all measures in mm).
60 cm
hob
70 cm 100 cm
hob hobs
A 45 105 105
B 290 340 470
C 45 45 45
D 45 45 65