Filter
Top Products
6
Figure 7. Mix Pump
B. Connect 1/2 inch (12,7mm) I.D. plastic food grade
tubing to mix check valve (Item 7) and then to the
mix container. Observe check valve flow arrow.
Secure with hose clamps. Then place assembly
thru hole in cover and install retainer clip. See
Figure 9.
C. Connect 1/2 inch (12,7mm) I.D. plastic food grade
tubing between the large port of air/mix tee and
refrigerated mix transfer line. Secure with large
hose clamp or equivalent. See Figure 9.
CAUTION
AIR/MIX TEE MUST REMAIN BELOW THE
BLACK COVER/CLAMP. IF THE TEE IS
ABOVE THE PUMP MIX WILL DRAIN TO THE
AIR COMPRESSOR RESULTING IN PUMP
DAMAGE.
D. Connect mix low cords. Figure 9.