Filter
Top Products
11
Heading
Always turn the power off and remove the
plug from the power outlet and the probe
from the probe inlet, after use and before
cleaning. Allow the BBQ oven to cool before
cleaning.
Control probe
If cleaning is necessary, wipe over with a
damp cloth.
Note: Before inserting the control probe
into the probe inlet, ensure the interior of
the inlet is completely dry. To do this wipe
interior of probe inlet with a dry cloth or
shake out excess water vigorously.
Important: Do not immerse the control probe
in water or any other liquid.
Do not knock or drop the probe as this can
damage the probe. If damage is suspected,
return the control probe to your nearest
Sunbeam Service Centre for inspection. Refer
to the separate warranty and service centre
booklet.
Hotplate and drip tray
The element in the hotplate is cast in, so it
is safe to fully immerse in water. Wash the
hotplate and drip tray in warm soapy water
using a mild household detergent and a soft
washing sponge.
A bottle brush may be used to clean the
drainage holes in the ribbed hotplate.
The hotplate and drip tray are also
dishwasher safe.
Note: Do not use abrasives or metal scourers
as they will scratch the non-stick cooking
surface. Dry the hot plate and drip tray
thoroughly before storing.
Moulded base and lid
The base and lid can be wiped over with a
damp cloth or washed in warm soapy water
using a mild household detergent and a soft
washing sponge. Do not use abrasives or
metal scourers as they may scratch these
parts.
Note: Do not place the moulded base or lid in
a dishwasher.
Stand
The stand can be wiped over with a damp
cloth.
Note: Do not place any part of the stand in a
dishwasher.
Storage
Always dry and assemble the Kettle King
before storing. Ensure the drip tray and
hotplate are correctly positioned.
For outdoor storage of your Kettle King,
remove the control probe and store in a safe,
dry place.
Care and Cleaning