Filter
Top Products
9
Operating your Cafe Series
®
Conical Burr Coffee Grinder II
(continued)
For grinding continuous quantities
7. Remove the lid from the ground coffee
container and slide onto the preparation
mat. The coffee container will fit
comfortably into the domestic size group
handle locator, see figure 3.
8. To grind coffee, flip the switch to the ‘On’
position, see figure 4.
9. When the desired amount of coffee has
been ground, flip the switch to the ‘Off’
position. Remove the coffee container and
scoop out the ground coffee.
For grinding into the group handle
10. Position the group handle into the group
handle locator, see figure 5.
Note: There are two group handle locators
provided, a smaller size to fit domestic
handles and a larger size for commercial
handles.
11. Flip the switch to the ‘Auto’ position,
see figure 6.
12. To grind coffee, press the group handle
against the button located in the centre
of the group handle locator, see figure 7.
Figure 4
Figure 5
Figure 6
Figure 3
Operating your Cafe Series
®
Conical Burr Coffee Grinder II