Filter
Top Products
17
Care and Cleaning (continued)
3. Press and hold down the ‘UNLOCK’ button
at the rear of the motor base and with the
other hand turn the grind adjustment collar
anti-clockwise until the graphic arrow on
the collar is aligned with the arrow on the
motor base, see figure 22.
4. While holding down the ‘UNLOCK’
button lift out the top burr from the grind
adjustment collar using the handle, see
figure 23. Clean using the burr-cleaning
brush.
5. Release the ‘UNLOCK’ button, slightly pull
up the grind adjustment collar away from
the motor base and turn anti-clockwise
until it detaches from the motor base.
See figure 24.
6. Clean the bottom burr using the burr-
cleaning brush, see figure 25.
7. Once both burrs are cleaned, return the
grind adjustment collar to its position in
the motor base. The arrow on the grind
adjustment collar is aligned with the
‘ALIGN’ arrow on the motor base. Turn
clockwise until the arrow on the grind
adjustment collar is aligned with ‘UNLOCK’
arrow and the ‘UNLOCK’ button pops
out. See figure 24.
8. With the grind adjustment collar in hand
align the arrow on the collar with the arrow
on the rear of the motor base, press down.
9. Replace the top burr back into position
in the grind adjustment collar and turn
clockwise to the desired grind setting.
Figure 22
Figure 23
Figure 24
Figure 25