Sunbeam LC7900 Food Processor User Manual


  Open as PDF
of 32
 
Note: Allattachmentsmustbefirmly
attachedtothespindle.Alwaysadjustthe
attachmentsuntilyouaresurethattheyare
correctlyfitted.
Placing the spindle
1.Fitthespindleontothedriveshaft,
seefigure4.
Universal 's' Blade
1.Fittheprocessingbowlandspindleas
detailedpreviouslyinfigures1,2&4.
2.Fittheuniversal's'bladeoverthespindle
andpressfirmlyintoplace,seefigure5.
Warning: Usecaution,asbladesaresharp.
Alwayshandletheprocessingbladebyits
centralplasticsection.
3.Placefoodintotheprocessingbowl.
4.Fittheprocessingcovertotheprocessing
bowl,seefigure3andplacethefood
pusherinthefeedchute.
5.Plugthepowercordintoa230-240VAC
poweroutletandturnthepower‘ON’.
6.StartprocessingusingtheSTART/STOP
orPulsebuttons.
7.Whenprocessingiscomplete,removethe
spindleandbladefromtheprocessingbowl
beforeremovingtheprocessedfood.
Fitting/Using the tools on your
Food Processor
Fig 4
Fig 5
9
 previous next