Filter
Top Products
10
Blade assembly
Important: Always ensure the blender is
unplugged from the power outlet before
fitting or removing the blade assembly.
Always handle the blade assembly with
caution, as the blades are extremely sharp.
To assemble the blade assembly follow these
steps and refer to figure 2;
1. Position blade assembly into position in
jug.
2. Whilst carefully holding the blade assembly
in position place the locking nut on the
underside of the jug and tighten.
3. Using the spanner tighten and lock the
blade assembly onto jug.
Figure 2
➀ ➁
➂