Filter
Top Products
5
Features of your StickMaster Stick Blender (continued)
Or
3.2.If fixing to a wood or cupboard surface,
drill a 2mm pilot hole to a depth of
20mm. Insert screws until the screw head
is protruding by approximately 5mm to
allow the charging stand to hang.
See figures 2.1, 2.2 and 2.3.
4. The charging stand should be mounted
on the wall as pictured. See figure 3.
1
2
Figure 3
Figure 2.2
Wall
5mm
Figure 2.3
02mm
Figure 2.1