Filter
Top Products
Next the left and middle LEDs will light up
blue continuously and the right LED will start
flashing blue. See Figure 6.
When the battery is fully charged, all three
LEDs will light up blue continuously on for
approximately 2 minutes and 20 seconds,
then all LEDs will turn off. This indicates
that the charging process is complete.
When the appliance is fully charged, it has a
cordless operating time of up to 20 minutes,
depending on the load. If required, the
appliance can be stored in the charging stand
while continuously plugged in.
Remaining battery capacity
The number of charging lights indicates the
amount of power left in the batteries. The
appliance features three LED lights: low,
medium, and high battery capacity. When the
left LED changes from blue to red and starts
flashing, this indicates that the batteries are
very low and need charging immediately.
Charging your StickMaster
®
Cordless Stick Blender continued
Figure 6
7