Filter
Top Products
6
Charging your StickMaster
®
Cordless Stick Blender
The stick blender will be partly charged
during production. Sunbeam recommend that
you charge your stick blender before you use
the appliance for the first time, or when the
left LED lights up red and starts flashing to
indicate that the batteries are low.
The charging time from a flat to a fully
charged battery is approximately 90 minutes.
1.Insert the adaptor into the adaptor inlet
and plug the adaptor into a suitable mains
outlet and switch on.
2. Place the motor housing in the charging
stand. Make sure the left LED starts
flashing blue to indicate that the appliance
is charging.
The adapter feels warm during charging. This
is normal.
When you charge the appliance for the first
time or after a long period of disuse, let the
battery fully recharge. When charging the
battery from a flat condition, the left LED
will start flashing blue. See Figure 4.
As the charging process continues, the left
LED will stop flashing and light up blue
continuously with the middle LED flashing
blue. See Figure 5.
Figure 5
Figure 4