Filter
Top Products
guide
Mixing Guide
SPEED MIXING
SETTING GUIDE EXAMPLE
1 Fold-Kneaded Use when mixing dry ingredients or when
folding two portions of a recipe together,
such as a beaten egg white into a batter
or when directions call for LOW speed.
Use for kneading bread.
2 Stir Use when stirring liquid ingredients or
when gentle action is needed to moisten
dry ingredients.
3 Blend Use when quick breads require a brisk
action, just enough to blend ingredients
but not enough to develop a smooth
batter.
4 Mix Use when mixing dry ingredients and
liquid ingredients together alternately in
a recipe.
5 Combine Use when recipe calls for combining
ingredients together.
6 Cake Mixes Use when preparing packaged cake
mixes or when directions call for
MEDIUM speed.
7 Cream Use when creaming sugar and butter
together.
8 Whip Use to whip potatoes or to develop a
smooth batter.
9 Whip/Cream Use to whip whipping cream or to
develop a light, fluffy texture.
10 Desserts Use to beat air into whipped desserts.
11 Frostings Use when preparing light, fluffy frostings
and candies.
12 Egg Whites Use when aerating eggs and egg whites.
Use when directions call for HIGH speed.
NOTE: Due to variations in ingredient temperatures and quantities, the Mixing
Guide speeds are only suggested. If necessary, adjust speeds as needed to
achieve desired results.
7
operating
ABOUT THE SPEED CONTROL DIAL
The speed control dial is used for turning the mixer
ON and OFF and for selecting its 12 mixing speeds.
Rotate the speed control dial in a clockwise
direction to increase mixing speed; and in a counter-
clockwise direction to decrease mixing speed.
As you rotate the speed control dial, notice that a
numbered speed is aligned with the indicator on top
of the mixer head. This numbered speed indicates
the speed at which the mixer is operating.
Rotate the speed control dial until the indicator is
opposite the numbered speed you wish to use.
BURST OF POWER
®
FEATURE
Press down on button or top handle to
automatically increase the beater speed by 150
RPM for an immediate boost of power.
HEAD LOCK
The head lock feature locks the mixing head in the
down position for added control while mixing and
locks it in the up position for added convenience
while cleaning.
To unlock, press down the button on the side of the
stand.
To lock, lower mixing head until it automatically
locks in place.
Operating Instructions
6
SPEED
INDICATOR
MIXING GUIDE
SPEED
CONTROL
DIAL
SUN400_2377_StandMxr_mech 3/14/02 11:38 AM Page 12