Filter
Top Products
General 11 Information
HOT SURFACE INDICATOR LIGHT
(some models)
Some models have an indicator light located on the ceramic glass cooktop that glows
as soon as the glass begins to warm up. When the heating unit is turned off, it will
continue to glow as long as the glass remains warm enough to cause burns. Other
models have 4 hot surface indicators (one per element) arranged in a cluster. Their
location is as shown in the illustration above.
SPECIAL CAUTION FOR ALUMINUM FOIL
AND ALUMINUM COOKING UTENSILS
1) Aluminum foil
Use of aluminum foil will damage the cooktop. Do not use under any circumstances.
2) Aluminum utensils
The melting point of aluminum being much lower than that of other metals, care must be taken when aluminum pots or pans are used.
If allowed to boil dry, not only will the utensil be ruined, but also permanent damage in the form of breakage, fusing or marking may
affect the ceramic glass surface.
THINGS TO REMEMBER
1. AVOID using bleach and don’t use ammonia to clean the ceramic surface.
2. Do not put plastic items on warm cooking areas.
3. Never slide oven racks across cooktop surface. They may scratch or metalmark the cooktop.
4. If cooktop should break, do not use cooktop or attempt to clean it. Call your authorized service technician immediately.
5. Never use a trivet or metal stand between the cooking utensil and the ceramic cooktop. The ceramic surface may be scratched, metal
marked or etched by such items.
6. Sugary spills can cause pitting of your cooktop surface. Therefore, you must begin cleaning the spills while the cooktop is still hot. Use
caution when following the steps below.
a) Turn off all surface units and remove all pans immediately.
b) Wearing an oven mitt, use a razor blade scraper to scrape the hot spill out of the cooking zone to a cooler area on the cooktop.
c) Allow the cooktop to cool.
Ceramic Glass Cooktop (some models) (continued)
Indicator
Light
USE AND CARE OF GLASS SURFACE
Problem Cause To Prevent To Remove
Fine ”brown Coarse particles (salt, Clean cooktop after Tiny scratches are not removable.
lines“ (tiny sand, sugar or grit) every use. They can be minimized by
scratches or between bottom of continual use of cleaner cream.
abrasions which cookware and cooktop Such scratches do not affect
have collected that are not removed cooking.
soil) before cooking.
Using incorrect cleaning Daily use of cleaner
materials. cream.
Metal marking Sliding or scraping Do not slide cookware Apply cleaner cream
(mark or black metal utensils or oven across cooktop. with dampened paper
marks). shelves across cooktop. towel to a cooled surface.
Brown streaks Cleaning with a Use cleaner cream Use a small amount of cleaner
and specks. sponge or dishcloth with clean, damp paper cream with clean, damp paper
that has been used towel. towel.
for other kitchen tasks.
NOTE: Due to the high intensity of heat generated by the surface elements, the glass surface will turn green when the element will be turned
off. This phenomenon is normal and the glass will come back to its original white color after it has completely cooled down. (White
glass cooktops only).