Tascam HD-R1 Refrigerator User Manual


  Open as PDF
of 24
 
12 TASCAM HD-R1
4–Recording
7 Use the SHUTTLE/DATA wheel to select
Channels
, and press the ENTER key.
Set the record channel mode with this item.
8 Use the SHUTTLE/DATA wheel to select the
channel mode, and press the ENTER key.
Stereo: records in stereo
•
Mono Right: records R channel input in mono
•
Mono Left: records L channel input in mono
•
9 Use the SHUTTLE/DATA wheel to select
Input
Source
, and press the ENTER key.
Set the record input source with this item.
10 Use the SHUTTLE/DATA wheel to select the record
input source, and press the ENTER key.
Analog/Mic: sets the input source to the MIC/LINE
•
INPUTS (XLR, RCA or Euro connectors) on the rear
panel
S/PDIF: sets the input source to the DIGITAL IN jack
•
on the rear panel
NOTE
If Analog/Mic is selected, the switches on the rear panel
also need to be set. See step 13 below.
11 As necessary, conduct other settings related to
recording.
See “Record settings” in the Owner’s Manual for
more details about those items.
12 When setting is completed, press the
MENU key
to return to the Home Screen.
13 If
Analog/Mic
was selected in procedure
10 above, set the switches on the rear panel
according to the analog input used as follows.
When using XLR inputs:
•Setthe
INPUT switch to XLR.
•Setthe
L INPUT and R INPUT switches to 0 or −20.
Iftheinputlevelistoohigh,usethe−20setting,
which engages a 20 dB pad.
•Ifacondensermicthatrequires+48Vphantom
power is connected set the
PHANTOM switch to ON.
When using the Euroblock:
•Setthe
INPUT switch to TRMNL
When using the RCA INPUT:
•Setthe
INPUT switch to XLR.
•SettheL INPUT and R INPUT switches to RCA.
 previous next