Taylor 220 Refrigerator User Manual


 
18
Model 220Operating Procedures
Step 5
When full strength mix isflowing from the ejection port,
push the draw rod back into the valve body and lock
into place.
Figure 32
Note: The funnel can be returned to its closed
position. Another measure of mix can be poured into
the hopper inreadiness for the next batch while thefirst
batch of mix is freezing.
Figure 33
Step 6
Place the mix hopper cover in position.
Figure 34
Step 7
Place the control switch in the “AUTO” position. When
the unit automatically cycles off, the light will turn off.
This light is a visual signal that the product is down to
its proper temperature. Place the control switch in the
“OFF” position.
Figure 35