Filter
Top Products
19
Model C706 Operating Procedures
Step 5
Assemble the piston. Slide the red o- ring into the
groove of the piston. DO NOT lubricate the o- ring.
Figure 23
Step 6
Lightly lubricate the inside of the pump cylinder at the
bottom with a paper thin layer of lubricant.
Figure 24
Step 7
Insert the piston into the bottom of the pump cylinder.
Figure 25
Step 8
Insert the mix inlet assembly into the pump cylinder.
Figure 26
The drive hole in the mix inlet adaptor must be visible
through the drive hole opening in the pump cylinder
and the aligning notch located at the base of the
adapter must be positioned into the notch at the
bottom of the pump cylinder.