Filter
Top Products
32
Model C706Troubleshooting Guide
PROBLEM PROBABLE CAUSE REMEDY PAGE
REF.
11. Product is not feeding into
the freezing cylinder.
a. Inadequate level of mix in
the mix hopper .
a. Fill the mix hopper with
mix.
24
b. The mix inlet hole is
frozen up.
b. The mix hopper
temperature needs
adjustment. Call service
technician.
---
12. The air/mix pump will not
operate when the PUMP
keyispressed.
a. The circuit breaker is off. a. Check the breaker.
---
b. The power cord is
unplugged.
b. Plug in the power cord.
---
c. The freezer is out on
reset.
c. Reset the freezer.
13
d. The pump motor is out on
reset.
d. Press the PUMP key to
cancel pump operation.
Press the reset button on
the side of the pump
motor reducer. Press the
PUMP key to continue
pump operation.
---
13. The air/mix pump will not
operate when the draw
valve is opened and the
unit is in the AUTO mode.
a. The pump motor is out on
reset.
a. Press the AUTO key to
cancel the pump
operation. Press the reset
button on the side of the
pump motor reducer .
Press the AUTO key to
continue automatic
operation.
---
b. The relay is
malfunctioning.
b. Contact service
technician.
---
14. The piston travels back
and forth, but product is
not being pumped.
a. Inspect the pump valve
gasket.
a. The pump valve gasket
must be installed correctly,
fit tightly, and not have
any holes or lubrication.
---
b. Inspect the o- rings. b. O- rings must not be worn,
torn, or fit too loosely.
28
c. Check the pump cylinder. c.Thepistonmustbe
assembled correctly and
fit snugly in the pump
cylinder.
19