Filter
Top Products
19
Model C712 Important: To the Operator
Enable the AUTO START TIME by selecting the UP
arrow symbol to move the arrow u p to Enable.
Touch the SEL symbol to advance to the next
screen. (See Figure 22.)
AUTO START TIME
00:00
Change
>Exit
Figure 22
Program the AUTO START TIME by selecting the
UP arrow symbol to move the arrow to Change.
Touch the SEL symbol to advance to the next
screen. (See Figure 23.)
AUTO START TIME
00
:00
Figure 23
Use the arrow symbols to program the AUTO
START TIME b y increasing or decreasing the hour
setting above the cursor. Touch the SEL symbol to
advance the cursor and program the minutes
setting. Select the SEL symbol to return to the
previous screen with the new time setting displayed.
Select the SEL symbol to exit the screen and return
to the Menu.
The STANDBY option is used to manually place
either side of the machine in the Standby mode
during long, no draw periods. Select the STANDBY
screen from the Menu. Touch the SEL symbol to
activate Standby.
Discontinue Standby operation by exiting the
Manager's Menu and select the AUTO mode.
(See Figure 24.)
STANDBY MODE
> EXIT
Figure 24
The MIX LEVEL AUDIBLE option when enabled will
alert the operator with an audible tone when there is
mix low or mix out condition. The following screen is
displayed upon selecting this option.
(See Figure 25.)
MIX LEVEL AUDIBLE
> Enable
Disable
Figure 25
Disable the audible tone feature by selecting the UP
arrow symbol to move the arrow to Disable. Select
the SEL symbol to save the new setting and return
to the Menu. The control panel icons for Mix Low
and Mix Out will light as the mix level drops in the
hopper but the audible tone will be disabled.
The FAULT DESCRIPTION display will indicate if
there is a fault with the freezer. When no faults are
detected the following screen will be displayed.
(See Figure 26.)
FAULT DESCRIPTION
NO FAULT FOUND
Figure 26
Touch the SEL symbol to display the next fault
found or return to the Menu if no other faults exist.
Touching the SEL symbol any time faults are
displayed will clear the faults if corrected, upon
returning to the Menu screen.