Filter
Top Products
C Oven Care and Use Manual
Do-It-Yourself Maintenance
Do-It-Yourself Maintenance
FAHRENHEIT TO CENTIGRADE
The oven has been preset to a Fahrenheit tem-
perature.
To Change to Centigrade, follow these steps:
I. Turn off both ovens.
2. Touch and hold the UPP and then the
CONVECTION pad at the same time.
3. F appears in the temperature digits; release both pads.
4. Touch CONVECTION; C replaces F. This alternates
when CONVECTION is touched.
5. To complete the change, touch UPPER .
CALIBRATING OVEN TEMPERATURE
The electronic thermostat has been preset to
0°F and accurately maintains its setting. If the
browning results are too light or too dark for your
preferences, you can raise or lower the setting.
To change the Calibration of the Oven
Temperature:
1. Turn off both ovens.
2. Touch and hold the pad in a double oven or
the OFF pad in a single oven; touch the BAKE pad.
3. 0 appears in the temperature digits; release all pads.
4. Touch BAKE and 0 changes in increments of 5 degrees
each time it is touched. The maximum adjustment is
± 35ºF. In Centigrade the range is ± 3ºC to 21ºC.
5. To complete the change, touch .
To calibrate the lower oven models: Repeat the
steps with this exception, touch the instead
of the pad.
LOWER
OFF
UPPER
OFF
UPPER
OFF
UPPER
OFF
Page 34
UPPER
OFF
UPPER
OFF