Filter
Top Products
Chart A 30" Range 36" Range
Shipping Weight 351 lbs. 371 lbs.
Weight without 228 lbs. 270 lbs.
packing materials
Without door, 185 lbs. 221 lbs.
burner caps, front kick
panel and oven racks
8
Step 3: Unpacking, Moving and Placing the Range
CAUTION
Proper equipment and ad-
equate manpower must be
used in moving the range to
avoid injury, and to avoid
damage to the unit or the
floor. The unit is heavy
and should be handled
accordingly.
• The range has an approximate
shipping weight as shown in
Chart A. It is recommended that
the grates, griddle/grill plate and
frame, burner caps, front kick
panel and oven racks be re-
moved to facilitate handling. This
will reduce the weight as shown
in Chart A and allow the range
to pass through 30" doorways.
See Figs. 2A and 2B on Page 5.
Do not remove the grill or
griddle assemblies.
• Remove the outer carton and
packing material from the ship-
ping base. The
dual fuel ranges
are held to the pallet by four (4)
bolts (see Fig. 4). After remov-
ing the bolts, the range must be
lifted and removed from the
pallet.
• Important: DO NOT lift the
range by the oven door's
handle, as this may damage
the door hinges and cause
the door to fit incorrectly to
the oven cavity.
FIG. 4 – Removal of the Four (4) Shipping Bolts
Pallet
NOTE: Leave adhesive-backed
foam layer over brushed-metal
surfaces, to protect finish from
scratches, until the range is in-
stalled in final position.