Filter
Top Products
9
2. With the Removable Filter in position in the Swing-Out
Filter Holder, place a #4 Melitta Cone Filter into the
Removable Filter.
3. Add the appropriate amount of ground coffee to the filter (See
Suggested Coffee Measurement Chart below.) Move the
Swing-Out Filter Holder in position on the coffee maker, it will
snap when it is secure.
WARNING: To avoid risk of personal injury or damage to
property, be sure that the Swing-Out Filter Holder is securely
in place. Failure to secure the Swing-Out Filter Holder may
result in hot water overflowing and spilling out of the machine.
Suggested Coffee Measurement Chart
For best results, use a level tablespoon for ground coffee
measurement. Make sure you use medium grind coffee for
perfect brew.
Number of Cups Level Tablespoons
10 7.5
86
6 4.5
1 cup = 5-oz. brewed coffee
Use more or less coffee to adjust to your taste.
4. Fill the Carafe with 6 to 10 cups of cold water.
NOTE: The coffee maker is designed to brew 6 to 10 cups of
coffee at a time. Attempting to brew less than 6 cups may
provide unsatisfactory results.
5. Carefully pour the water into the Water Fill Area on top of the
coffee maker.
6. Place the Carafe on the Warming Plate.
7. To start the brew cycle, set the Control Dial to “BREW.”
8. Press the Warming Plate Switch to On. The Warming Plate
Indicator Light will illuminate to indicate that the Warming
Plate is on.
NOTE: To avoid damaging the Carafe, the Warming Plate
Switch must be turned Off when the Carafe is empty or when
the coffee maker is not in use.
9. When the brew cycle is complete set the Control Dial to “FILL”
to prepare machine for the next pot of coffee. You can now
enjoy your freshly brewed pot of delicious coffee.
MERB10B rev 1/21/05 9:26 AM Page 9