Filter
Top Products
FIN-PRC003-EN12
Wiring
Diagrams
Model EWFB
Controls
Description – Single Pole
Catalog Number – RDBT-ITS
Rated 25 amps at 120-277 VAC. 50-110°F
temperature range. Tamperproof and
adjustable through discharge louver.
Description – Double Pole Thermostat
Catalog Number – RDBT-ITD
Rated 25 amps at 120-277 VAC. 50-110°F
temperature range. Tamperproof and
adjustable through discharge louver.
Description – Disconnect Switch
Catalog Number – RDBT-IDS
Double pole rated 20 amps at 120-277
VAC.
Field Wiring With Integral Controls
•
Integral thermostats: wire entry from
either end.
•
Disconnect switch: right hand wire
entry.
•
Thermostat and disconnect: right hand
wire entry.
•
Relays: right hand wire entry – control
section.
•
Thermostat – disconnect and relay:
right hand wire entry – control section.
When heaters are furnished with
controls, make certain that the heater or
heaters do not exceed the lowest
amperage rating of the controls
furnished. For example, if a thermostat
and disconnect are furnished, the
thermostat is rated at 25 amps 240 and
277 VAC, the disconnect is rated
20 amps 240 and 277 VAC. Therefore, the
combination of heaters should not
exceed 20 amps at 277 or 240 VAC.
Wiring Diagrams
Wiring Diagrams – Control Section