Filter
Top Products
15
FIN-PRC003-EN
Mechanical
Specifications
Model EWFB
Enclosure Models and Type:
•
Model DBT – Wall mounted (bottom air
inlet and top air outlet) are snap fit two-
piece construction, 6" (152 mm) high x
3
1
/2" (89 mm) deep manufactured from
12-gauge (2.7 mm thickness) extruded
aluminum. Extrusion are .100" (2.5
mm) thick 6063 aluminum heat treated
to T-5 hardness. Backplates are 12-
gauge (2.7 mm thickness) extruded
aluminum. Maximum wattage is 300
watts per foot (984 watts per meter).
•
Model DBF – Wall mounted (bottom
front air inlet grille and top air outlet) is
snap fit two-piece construction,
6" (152 mm) high x 3
1
/2" (89 mm) deep
manufactured from 12-gauge (2.7 mm
thickness) extruded aluminum.
Extrusion is .100" (2.5 mm) thick 6063
aluminum heat treated to T-5 hardness.
Backplates are 12-gauge (2.7 mm
thickness) extruded aluminum for zero
clearance mounting. Maximum
wattage is 250 watts per foot (820
watts per meter).
•
Model CB – Wall mounted (bottom air
inlet and top air outlet) are snap fit
two-piece construction, 4
1
/2" (114 mm)
high x 2
5
/8" (67 mm) deep
manufactured from 14-gauge (1.9 mm
thickness) extruded aluminum.
Extrusion is .70" (1.8 mm) thick 6063
aluminum heat treated to T-5 hardness.
Backplates are 14-gauge (1.9 mm
thickness) extruded aluminum.
Maximum wattage is 250 watts per
foot (820 watts per meter).
•
Model DBCT – Wall mounted (bottom
air inlet and top air outlet) are snap fit
two-piece construction, 7" (178 mm)
high x 5" (127 mm) deep manufactured
from 10-gauge (3.4 mm thickness)
extruded aluminum. Extrusion is .100"
(2.5 mm) thick 6063 aluminum heat
treated to T-5 hardness. Backplates are
10-gauge (3.4 mm thickness) extruded
aluminum. Maximum wattage is 750
watts per foot (2460 watts per meter).
•
Model DBCF – Wall mounted (front air
inlet grille and top air outlet) are snap
fit two-piece construction, 7" (178 mm)
high x 5" (127 mm) deep manufactured
from 10-gauge (3.4 mm thickness)
extruded aluminum. Extrusion is .100"
(2.5 mm) thick 6063 aluminum heat
treated to T-5 hardness. Backplates are
10-gauge (3.4 mm thickness) extruded
aluminum. Maximum wattage is 650
watts per foot (2133 watts per meter).
•
Model RDBT-PD – Pedestal mounted
(bottom air intake and top air outlet)
enclosure are rounded with a flat top
air discharge, 5" (127 mm) high x
6" (152 mm) deep manufactured from
12-gauge (2.7 mm) thick extruded
aluminum. Extrusion is .100" (2.5 mm)
thick heat treated to T-5 hardness.
Pedestals are 2" (51 mm) high for
overall height of 7" (178 mm) from the
floor to the top of the enclosure.
Maximum wattage is 300 watts per
foot (984 watts per meter).
•
Model ASHDB – Wall mounted
(bottom air inlet and top air outlet) are
available in 8" (203 mm), 10" (254 mm),
12" (305 mm), 14" (356 mm), 16" (406
mm) 18" (457 mm) and 20" (508 mm)
heights in a 5
1
/2" (140 mm) depth.
Enclosure front and back panel are
manufactured from 16-gauge (1.5 mm
thickness) steel and is snap fit two-
piece construction. Discharge grille is
12-gauge (2.7 mm thickness) one piece
continuous extruded aluminum,
.100" (2.5 mm) thick 6063 aluminum
heat treated to T-5 hardness.
Maximum wattage is 500 watts per
foot (1640 watts per meter).