Filter
Top Products
Note: When the automatic timed period
starts, the oven indicator neon will cycle ON
and OFF during cooking.
B) TO SET THE TIMER TO SWITCH OFF
ONLY
i) Ensure the electricity supply is switched ON
and that the correct time of day is displayed,
e.g. 10.00 a.m. as Fig. 9.
ii) Place food in oven.
iii) To set the length of cooking time, press the
cooking hours button ( ) depress the
increase control (
+ ) until the required length
of cooking time is displayed, e.g. 2 hrs 15
mins as Fig. 10. Depress the decrease control
(
---) if necessary.
iv) Release the buttons. The AUTO display will
glow and the time of day will be displayed
after 5 seconds.
v) Set the oven temperature and select the
required function. The oven indicator neon
should be ON.
vi) To check the stop time during the cooking
period, simply press the stop time button
( ) and the stop time will be displayed, as
Fig. 11.
4. TO RETURN THE COOKER TO
MANUAL OPERATION
To cancel an automatic programme, or return the
cooker to manual operation, follow the steps
given below.
At the end of a timed cooking period, the AUTO
light will flash and a bleeper will sound for up to 2
minutes. This can be stopped by pressing any of
the 4 left hand side buttons as Fig. 12.
Turn oven control and selector to the OFF
position. The AUTO display will continue to flash.
Press ( ) button. The AUTO display will go out
as Fig. 13.
Turn the oven control and selector ON to check
that the oven operates manually. The oven
indicator neon will glow.
Turn all oven controls OFF. No indicator neons
should be lit.
21
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
A
U
T
O
A
U
T
O