Filter
Top Products
Step 6: Adjusting the Time
The Adjust Time option is turned off by default. If you want the ability
to modify the cook time before each cook cycle, this feature can be
turned on from the “Options” screen (see page 15).
1. If the “Adjust Time” screen appears, change the cook time (if
required) using the number keys.
2. Press Enter or bottom-right softkey to confirm and begin cooking.
Step 5: Ready to Cook
WARNING: Inside of oven and oven door are hot! Use extreme caution.
1. Place the food into the oven.
2. Select a food group by pressing its adjacent soft key (Figure 13), or press
the Up or Down key for additional food groups, if available.
3. Select an item (Figure 14) to cook by pressing its adjacent soft key.
12 COOKING
Step 4: Soaking
Once the oven temperature reaches the set point, the oven will continue
to warm for eight minutes to ensure the cook cavity surfaces absorb
enough heat so as to not affect cooking results. This process is called
“soaking.”
Figure 12: Soaking
Figure 13: Group Select
Figure 15: Adjust Time
Step 7: Cooking
NOTE: To immediately terminate a cook cycle, press the Back/Stop key.
NOTE: If the oven door is opened during a cook cycle, the cycle will
pause until the door is closed and “Resume” is selected.
Figure 16: Cooking
WARMING UP
OVEN TCC = 500F
SET POINT= 500F
08:00
GROUP 1
GROUP 2
GROUP 3
GROUP 4
SP = 500F
GROUP 5
GROUP 6
GROUP 7
GROUP 8
GROUP 9
GROUP 10
RECIPE 1
RECIPE 2
RECIPE 3
RECIPE 4
GROUP 1
RECIPE 5
RECIPE 6
RECIPE 7
RECIPE 8
RECIPE 9
RECIPE 10
ADJUST TIME
START COOK
01:40
COOKING
01:17
Figure 14: Item Select