Filter
Top Products
THE EDIT MODE
17
Overview of the Edit Mode
The EDIT MODE serves three main purposes:
1. To edit cook temperatures.
2. To edit names of food groups and items.
3. To edit food item settings.
To access the
EDIT MODE,
1. Enable it from the “Options” screen (page 15).
2. Press the On/Off key to return the oven to the
“Cooling Down” or “Off” screen.
3. Press the On/Off key again to enter
EDIT MODE.
Changing Set Temperatures
The oven can store two set temperatures. By default,
both temperatures are set to 450°F (232°C).
Think of each temperature as a “block” of 10 food
groups with 10 items each, or 100 total food items.
If a menu was loaded via smart card or USB (page
16), the temperatures are already set - they need not
be changed. The set temperature should never be
changed during normal operation.
Changing the set temperatures is not advised as a
solution for products that are over-cooked or under-
cooked. Rather, consult your authorized distributor or
TurboChef Customer Support if recipe settings are
not cooking as desired.
To change a set temperature,
1. Place the oven in
EDIT MODE (see adjacent).
2. Select the temperature to change by pressing
the adjacent soft key (Figure 29).
3. Using the numeric keypad, enter the new set
temperature.
4. Press the Enter key to confirm the change, or
the Back/Stop key to cancel.
EDIT TEMP 1 GROUPSEDIT TEMP 1: 500F
EDIT TEMP 2: 350F EDIT TEMP 2 GROUPS
VALID RANGE BETWEEN 350 - 525F
Figure 29: Temperature Edit Screen
R1
R2
R3
R4
R5
L1
L2
L3
L4
L5