Filter
Top Products
16
INFO MODE
Load Menu from USB or Smart Card
NOTE: To update a menu, you may need to verify
that access to the Load Menu screen is turned on.
See page 13 for details.
USB setup: When loading from USB, the menu can
be in XTM (ChefComm) or BIN (binary) format.
The files must be loaded on the root of the USB.
The oven will also detect menus if they are stored in
a folder named TC_Menus.
To load a menu to the oven,
1. When the oven is off or cooling down, insert
the USB or smart card (see below). The oven
will automatically detect the device. Touch
“OK” to proceed.
2. Load the menu:
a. Touch “Load Menu to Oven.”
b. Touch “OK” to confirm the selection and
begin the installation.
NOTE: When loading a menu from a USB,
a copy of the current menu will be saved
to the USB.
c. Touch the menu to load.
NOTE: If multiple menus are on the USB,
the oven will display the menu names.
Otherwise this step will be bypassed.
3. Once installation is complete, the oven
will display “Installation Complete.”
Save Menu to USB or Smart Card
NOTE: To save a copy of the oven menu, you may
need to verify that access to the Load Menu screen
is turned on. See page 13 for details.
1. When the oven is off or cooling down, insert
the USB or smart card (see adjacent). The
oven will automatically detect the device.
Touch “OK” to proceed.
2. Save the menu:
a. For USB, touch “Save to USB.”
b. For smart card, touch “Save to Card.”
Continued on next page...
NOTE: Gold chip must
face towards you.