Filter
Top Products
5. Remove existing bottom hinge (3 screws) and remount on
opposite side TOP. Remove hinge screw pin.
6. With bottom of door facing up, remove pivot plate (2 screws), flip
over, and remount on opposite side of door (see Figure 17).
Figure 17
7. Holding door upright with top of
door tilted forward, place hole of
door pivot plate on bottom hinge
screw pin (see Figure 18).
8. Tilt top of door into position in top
hinge and install top hinge screw
pin.
9. Install plastic screw plugs
removed in Step 2 in old hinge
holes (3 each, top and bottom).
Figure 18
UL312A
UL319
User’s Manual
16