Filter
Top Products
5
INSTALLATION DIMENSIONS
Figure 1
DRAIN INSTALLATION
PLEASE READ all instructions completely before attempting
to install or operate the unit. All Ice Makers require a con-
nection to the water supply and improper hook-up can
result in substantial property damage! All water and drain
connections MUST BE made by a licensed/qualified plumb-
ing contractor. Failure to follow recommendations and
instructions may result in damage and/or harm.
Plumbing installation must observe all state and local
codes. All water and drain connections MUST BE made by
a licensed/qualified plumbing contractor. Failure to follow
recommendations and instructions may result in damage
and/or harm.
The CLR2060 can be installed using a gravity drain or can use a fac-
tory installed or equivalent drain pump.
!
CAUTION
OFF
ON
UL202
14-7/8"
(37.8)
34-1/8"
(86.7)
FULL
RETRACT
HEIGHT
WATER
DRAIN
WATER
VALVE
WATER
OUTLET
4.5"
(11.4)
24"
(61)
21-3/4"
(55.2)