Filter
Top Products
Ice machine cleaner is used to remove lime scale and other mineral
deposits. Refer to the following steps for mineral deposit removal.
Never use anything to force ice from the evaporator.
Damage may result.
1. Set the cycle selector switch
to OFF and allow the ice to
melt off of the evaporator.
2. Remove all ice from the
storage bin.
3. Remove inside front cover
(see Figure 26).
4. Remove the overflow tube by
lifting it up while using a
slight back and forth motion
to loosen it from the drain
hole (see Figure 27). The
water in the reservoir will
flow down the drain.
5. Replace the overflow tube
after all of the water has
drained from the reservoir.
6. Move the cycle selector
switch to the CLN position.
7. When water begins to flow
over the evaporator (approxi-
mately 3 minutes), add one
package of U-Line Ice Machine
cleaner to the water reser-
voir.
8. Reinstall inside front cover.
!
CAUTION
25
UL208
FRONT COVER
Figure 26
UL209
OVERFLOW
Figure 27