Filter
Top Products
STORAGE, VACATION AND MOVING
If the unit is to be stored, moved or not used for extended periods, it
will be necessary to drain the system of water.
Electrical Shock Hazard. Disconnect power
before servicing. Before operating replace all
panels. Failure to do so can result in death or
electrical shock.
1. Disconnect power from the
unit.
2. Remove ice from the stor-
age bin.
3. Shut off water supply at the
main water source.
4. Remove grille (2 screws).
5. Remove the front access
panel (2 screws) (see
Figure 4).
6. Disconnect the inlet and
outlet lines to the water
valve and allow them to
drain (see Figure 29).
If the ambient temperature is expected to drop below 40°F,
drain all water from the unit to prevent freezing damage not
covered by the warranty.
NOTE
The use of anti-freeze or other products of this nature is not
necessary and is not recommended.
!
WARNING
!
WARNING
27
UL404
WATER
INLET
WATER
OUTLET
I
C
E
O
F
F
C
L
N
Figure 29