26
User’s Manual
MARINE USE
Many U-Line models are designed to operate in a harsh marine
environment. Special considerations include the following:
• For best performance, keep the unit out of direct sunlight.
• On Ice Maker models, turn the unit OFF and dispose of any ice cubes
if the unit will not be used for 5 days or more. Prop door open to
allow for air circulation and prevent mold and mildew. Do not use anti-
freeze in your icemaker.
• If the ambient temperature is expected to drop below 45°F, drain all
water from the unit to prevent freezing damage not covered by the
warranty.
• High ambient temperatures (110°F or higher) may reduce the unit’s
ability to reach low temperatures and may also reduce the ice pro-
duction rate.
ADJUSTING THE TEMPERATURE
CONTROL
Models BI-95 and BI-98: Use a flat tip screwdriver to turn adjusting
screw, located behind front grille, clockwise for colder (slower ice pro-
duction) or counterclockwise for warmer (faster ice production).
Series 15, 29 and 75: Adjust
control setting by turning the
numbered dial (see Figure 38).
Model SP18 temperature
control has been preset at the
factory for optimum ice
production. Do not attempt to
make adjustments.
UL504
1
2
3
4
5
6
7
CONTROL
Figure 38
Users Manual 41923 9/2/03 3:44 PM Page 26