Filter
Top Products
d. Door Jambs. Humidity control wires (Fascia
Heaters) located around the door jamb prevent
condensation from forming on the cabinet front
and are concealed by a high impact non-
conductive thermal breaker strip.
e. Door Interior Liner is constructed of durable
ABS material.
2. Refrigeration System. The refrigeration system is
self-contained capillary tube design.
3. Shelves and Pans. (Refer to Figure 1-2 and to the
Parts List Section of this manual).
a. Wire shelves. Heavy-duty epoxy coated wire
shelves are adjustable in 1” increments. Shelf
clips to support the shelves are inserted into
pilasters on the walls.
b. Pan slides. A wide door opening allows the use
of a variety of optional pan slide types for 12” x
20”, 18” x 26” and 14” x 18” pans and/or trays.
●●
Stainless Steel Adjustable Type Pan
Slides as shown in Figure 1-2 are adjustable
in increments.
●●
Steel Rod Type Pan Slide Racks, as shown
in Figure 1-2, are bottom supported with 2”
centers, or lip supported with 1-1/2” centers.
4. Cabinet. The cabinet ends and interior are made of
brushed aluminum. Fronts are made of stainless
steel. Foamed-in-place polyurethane insulation
through the cabinet and doors ensures the ultimate
in energy efficiency.
5. Dial Thermometer. The dial thermometer is
standard and is calibrated at the factory.
6. Thermometer Sensing Bulb. The temperature
sensing bulb is located in the cabinet in the top right
hand corner.
7. Thermostat Control Bulb (Not Shown). The
refrigerator senses evaporator temperature. The
freezer senses return air temperature.
SECTION 1-DESCRIPTION SECTION 1-DESCRIPTION
3