Filter
Top Products
19
1
2
2
20°
1
2
Open door approximately 20°, then slowly pull upward
until the door stop pops out of door socket.
Gently close until the door rests against one of the stop
notches.
3
Slide door completely from hinge arms.
Door Removal (36”W.)
NOTICE
DO NOT use the handle or oven door to
lift the oven. Remove door before
installation to ensure that it is not used to
lift the unit. DO NOT lift or carry the door
by the handle.
Removing the door must be done by your
dealer, a qualified licensed plumber, or
certified gas installer.
Installation (36”W.)
18
1
2
Replace door.
Open door completely. Reinstall hinge trim plates.
Note: Screw holes may need to be re-aligned.
3
4
Take out pins.
Note: To adjust door turn adjustment screw
clockwise (up) or counterclockwise (down).
Close door.
Door Replacement & Adjustment (30”W.)
CAUTION
To avoid risk of personal injury or property
damage, verify door stops are engaged
before removing door.