Filter
Top Products
4
CONTROL PANEL
XL
TM
– Variable Speed
ON/OFF Switch.
Located on the side of the machine, the ON/OFF
switch controls the power to the machine.While plugged in, switch
to ON to ready the machine for blending. Shut OFF the power
switch at night or whenever the machine will be left unattended.
START/STOP Switch –
The START/STOP switch is located on the
left side of the control panel when facing the machine.Activate the
machine by depressing the top of the switch button to start ( ),
and stop the machine by depressing the bottom of the switch to stop ( ). The START/STOP
switch will activate the blades at the selected variable speed dial setting.
VARIABLE SPEED DIAL
– Allows the user to select continuously variable motor speeds
ranging from 1,500 rpm to 28,000 rpm.
PULSE Switch
– Pulse switch can only be used when the START/STOP switch is in the
stopped or the ( ) position.The pulse switch can be used to quickly refresh product in the
container by depressing the switch and holding down as long as needed. When activated,
the pulse switch operates the machine at the selected variable speed dial setting.
ON
O
FF
LARGE CAPACITY BLENDER
V
ARIABLE SPEED
Start/Stop Switch
Variable Speed Dial
Pulse Switch
Cleaning: Switches may become sticky from use. Unplug the machine and use a wet cloth,
moistened with water and a mild detergent, to clean around the edges of the switch paddles until
they function freely. Work the switches back and forth a few times to loosen any dried residue under
switch. Leaving switches sticky will damage or burn out the switches. Clean carefully, using caution
not to allow water or other liquids to infiltrate the switch.
WARNING: When the machine is not in use, turn the ON/OFF Switch to OFF, or unplug the machine
from the outlet.
IMPORTANT NOTES!