Filter
Top Products
LID ASSEMBLY
Two-Piece Accelerator
Tool Lid
64 oz. / 2.0 L Advance Container
• To secure lid, place on top of container and
gently press down until lid snaps into place,
making sure the latches are secured around
the top of the container rim.
• To remove a fully latched lid, lift one of the
two tabs and pull upward and off.
• Twist the center lid plug to fasten or remove.
• The lid plug can be removed when using the
accelerator tool or adding ingredients.
Two-Piece Lid (optional)
64 oz. / 2.0 L Advance Container
The two-piece lid is easy to clean and easy to put on,
take off and seal.
• To secure lid, place on top of container and
gently press down until lid snaps into place,
making sure the latches are secured around
the top of the container rim.
• To remove a fully latched lid, lift one of the
two tabs and pull upward and off.
• Twist the center lid plug to fasten or remove.
•
DO NOT USE WITH ACCELERATOR TOOL
Lift lid tabs
to remove lid
To secure lid plug, rotate it so one tab locks
between the notches on top of rubber lid
FIGURE A
Lift lid tabs
to remove lid
To secure lid plug, rotate it so one tab locks
between the notches on top of rubber lid
FIGURE B
Containers:
• XL
TM
Blendersareoptimizedforusewith theVita-Mix1.5gal./ 5.7L & Advance64oz./ 2.0L containers.
Use of other Vita-Mix standard containers (64 oz. / 2.0 L, 48 oz. / 1.5 L, or compact 32 oz. / 0.9 L)
are not compatible. Call Vita-Mix Customer Service or your distributor for moreinformation.
Lids:
• To make new lids easier to insert and remove, rub a light coating of cooking oil around the rim
where it seals. Place it in a container for several minutes, remove and lightly wipe oil off lid.
IMPORTANT NOTES!
6