Vulcan-Hart 7800 Range User Manual


 
– 10 –
SERVICE & PARTS H SERIES
REPLACEMENT PARTS LIST
WARNING ALL SERVICE PERSONNEL
WHEN SERVICING THIS EQUIPMENT, USE ONLY
CERTIFIED CONTROLS DUPLICATING THOSE ORIGINALLY
SUPPLIED ON THIS EQUIPMENT BY VULCAN-HART
COMPANY.
DO NOT SUBSTITUTE COMPONENTS WITH DIFFERENT
MODEL NUMBERS.
DO NOT SUBSTITUTE COMPONENTS WITH DIFFERENT
MANUFACTURING NAMES.
DO NOT SUBSTITUTE COMPONENTS WITH REBUILT
CONTROLS WITHOUT AUTHORIZATION FROM VULCAN-
HART CORP. ANY UNAUTHORIZED SUBSTITUTION OF
CONTROLS AS STATED ABOVE MAY BE A HAZARD AND
WILL AUTOMATICALLY VOID THE WARRANTY AND THE
CERTIFICATION ASSOCIATED WITH THIS EQUIPMENT.
Replacement parts orders:
The following information must accompany a replacement parts order or it cannot be filled.
A. Model and serial number
B. Type of gas
C. Unit voltage, ampage and motor phase
D. Appliance finish black, gray, stainless steel etc.
This information may be found on the unit rating plate located on the control panel (alternate
location is behind the lower front cover attached to the burner box area). Parts may be ordered
from your dealer, service agency, or parts distributor. For further information concerning parts
ordering location, contact Vulcan-Hart Company, 3600 North Point Blvd. Baltimore, Maryland
21222, or in Canada, Vulcan-Hart Canada Incorporated, 79 West Street South Orillia, Ontario L3V
6K5.
Note: NS = Not Shown By Photo or Diagram